650TVL Day / 700TVL Night
0.3Lux (Day) / 0.003Lux (Night)
50-55M IR Range
6-50mm Varifocal Lens / 5 Year Warranty
An advanced Infrared technology designed to give smooth, even illumination. AIR technology has been developed and tested rigorously to deliver optimum CCTV footage in extreme lighting conditions.
The AIR HGE range is built to be installer friendly. Camera set-up is made easy with a service video output for test monitors and external lens adjustment screws. AIR HGE range specification is suitable for all medium to long range applications requiring a simple and reliable camera unit.
550TVLO, LUX, 20 HIGH POWER IR LEDS, 6-50MM VARIFOCAL LENS,UP TO 180KPH NPC SPEED, 5 YEAR WARRANTY.
Housed Concept Pro Number Plate Capture camera
The AIR20NPC is a Number Plate Capture camera by Concept Pro. It is part of the AIR range of Infra Red cameras from Concept Pro, offering robust build quality and easy installation and use.
Thanks to 20 Super High Power LEDs, it can operate down to 0 Lux and can capture number plates at a range of up to 30m and at speeds of up to 112mph.
This high maximum speed makes it suitable for virtually any number plate capture installation. If you are looking for a more affordable number plate capture camera, the AIR60 NPCis better suited to short range footage and lower vehicle speeds (such as in a car park or security barrier).
Supervised Alarm Transmission with Backup Transmission Path, using the GSM Network.
The Dualtech TS100T increases the level of security in all kinds of security systems. The TS100T supervises the fixed telephone line and immediately gives the alarm panel an alternative communication path via GSM at any kind of telephone line failure allowing the alarm panel to send its digital alarm protocol SIA, Contact-ID etc to the Central Monitoring Station via GSM.
The TS100T is also equipped with integrated alarm inputs which alow the system to deliver SMS messages to optional receivers. The remote controlling of the TS100T outputs is easily done from an ordinary tone dialling telephone or a mobile phone.
External True Day/Night Bullet Camera with LEDs
The VS2 high resolution bullet camera is available in 3 different lens sizes and comes with built in IR LEDs. The lens can be adjusted through the External Focal/Zoom Adjustment Ring. Other features include motion detection, back light compensation, split glass technology and privacy image masking with free position: 4 zones. The camera has a resolution of 540TVL, is weatherproof to a rating of IP66 and comes complete with a cable management bracket.
When designing links with zone cables the appropriate attenuation factor should be used to calculate the maximum link length. The attenuation factor for these cables is 1.5.
RWL have recently launched the new Excel Tool-less Cat6 jack:
- Category 6 compliant
- Forms Angled Cat 6 Patch Panel with frames listed below
- Two piece, easy to use design
- Toolless termination design
- Suitable for patch panel mounting
- 25 year system warranty
- Ideal for high density cabling installations
New High density panel released from Brand-Rex.
- Built for the Brand-Rex High Density Fibre Cabinet
- 17” and 19" Frame compatible
- 48 LC ports 1U - using unique ½U trays
The new Augmented Category 6 shielded jack from Brand-Rex brings new levels of flexibility, performance, and ease of installation to higher-speed Ethernet deployments.
The new shielded jack, now independently verified to ISO/IEC 60603-7-51 edition 1 and ISO/IEC 11801 amendment 2, features the innovative Brand-Rex patented contact array and 360-degree screening to deliver enhanced electrical performance. It is the worlds smallest Cat6a shielded jack.
Designed for use in data centres and local area networks future-proofed for higher-speed protocols such as 10GBASE-T, the latest Augmented Category 6 shielded jack from Brand-Rex incorporates a number of innovations to ensure a rapid, robust and versatile install in patch panels, back boxes, wall outlets and floor-box modules.
The new Augmented Category 6 shielded jack from Brand-Rex brings new levels of flexibility, performance, and ease of installation to higher-speed Ethernet deployments.
The new shielded jack, now independently verified to ISO/IEC 60603-7-51 edition 1 and ISO/IEC 11801 amendment 2, features the innovative Brand-Rex patented contact array and 360-degree screening to deliver enhanced electrical performance. It is the worlds smallest Cat6a shielded jack.
Designed for use in data centres and local area networks future-proofed for higher-speed protocols such as 10GBASE-T, the latest Augmented Category 6 shielded jack from Brand-Rex incorporates a number of innovations to ensure a rapid, robust and versatile install in patch panels, back boxes, wall outlets and floor-box modules
RWL have secured significant overseas business over the last two years to provide significant assistance to continued growth of RWL. Recent projects in Casablanca, Helsinki, Glasgow and Milan have been delivered within stringent timeframes in partnership with International suppliers and specialist installers.
As the local conditions remain challenging, the decision to focus on alternative markets has enabled RWL to maintain considerable success in the project arena. Pre-sales design and schedule planning helped deliver the new Dell offices in Casablanca in Morocco. The project started in 2009 and was completed in June 2010. The project contained over 4000 Brand-Rex Cat6 outlets and a 10 Gigabit fibre optic backbone. RWL provided site audits in addition to distribution of all products to the contractor. RWL in partnership with Dell and Brand-Rex, provided a full evaluation of local contractors before finalising the list from which Dell nominated from.
Tommy Lyons, Chairman of RWL comments, " It is natural for RWL to utilise our skill-set in working with end-users and contractors regardless of borders or boundaries. Our manufacturing partners are mainly global companies and have the ability to service many international areas far beyond Ireland. This had aided RWL hugely when presented with overseas opportunities and it continues to enhance our overall business which is still principally focused in Ireland. March marks the date for completion of our latest foreign project in Milan.’’